SONY KDL-KDL-32S5100 - KDL-40S5100 - KDL-46S5100 SERVICE MODE

SONY KDL-32S5100 - KDL-40S5100 - KDL-46S5100 

SERVICE MODE 

ACCESSING SERVICE MODE
1. TV must be in standby mode. (Power off).
2. Press the following buttons on the Remote Commander within a second of each other:
DISPLAY > Channel 5 > Volume + > POWER .
ENTERING THE SERIAL NUMBER AFTER CHANGING THE MAIN BOARD
Use the following instructions to re-enter the Serial Number of the TV after replacing the Main (BM3) Board.
1. After accessing service mode, press ENTER to display the Self Diagnostic list.
2. To change the serial number field, press ENTER  then using the number keys on the remote enter the Serial Number of the TV.
3. To save the Serial Number, press ENTER.
4. To exit Service Mode, press MENU
RESETTING TO FACTORY DEFAULTS
1. After accessing service mode, press the DOWN ARROW  button to highlight Factory Default, then press ENTER.
2. To reset to Factory Defaults, press ENTER then follow the on-screen instructions.
3. After selecting the language preference the on-screen display indicates to “select the type of use for this TV.”
Home must be selected for optimal picture performance in the customers home.
4. Continue following the on-screen instructions.
NOTE: All other Service Mode information listed, ADC Auto Calibration, Clone User Setting, and Direct Log to USB will be reviewed in the Training Manual for these models.
SELF-DIAGNOSTIC FUNCTION
The units in this manual contain a self-diagnostic function. If an error occurs, the STANDBY LED indicator will automatically begin to fl ash. The number of times the LED fl ashes translates to a probable source of the problem. A definition of the STANDBY LED fl ash indicators is listed in the instruction manual for the user’s knowledge and reference. If an error symptom cannot be reproduced, the Remote Commander can be used to review the failure occurrence data stored in memory to reveal past problems and how often these problems occur.
1. Diagnostic Test Indicators
When an error occurs, the STANDBY LED indicator will flash a set number of times to indicate the possible cause of the problem. If there is more than
one error, the indicator will identify the first of the problem areas.
Description of LED Indictors
LED

LED Type

Description

POWER LED


Green LED


* Lights up in green when the TV set is turned on.

STANDBY LED






Red LED






* Lights up in red when TV is in PC standby mode.
* If LED blinks continuously, this may indicate
that the TV needs servicing.


PIC OFF/
TIMER
LED
Green or Orange
LED
* Lights up in green when Picture Off is activated.
* Lights up in orange when the timer is set.
When timer is set, this LED remains lit even
when the TV is turned off.

Viewing the Self Check Diagnostic List
1. TV must be in standby mode. (Power off).
2. Press the following buttons on the Remote Commander within a second of each other:
DISPLAY > Channel 5 > Volume - >TV POWER .
The Self Check list displays.
NOTE: This is the same as accessing Service Adjustments. The logo displays momentarily, then the Service Mode list displays.
3. To display the Self Diagnostic list, press ENTER .