SONY KDL-40W4500 -KDL-46W4500 SERVICE MODE AND POWER SUPPLY CIRCUIT

SONY KDL-40W4500 -KDL-46W4500 

LCD TV

 SERVICE MODE AND POWER SUPPLY CIRCUIT 

SERVICE MODE
Service adjustments to this model can be performed using the supplied Remote Commander RM-ED011.
1. Turn on the power to the TV set and enter into the stand-by mode.
2. Press the following sequence of buttons on the Remote Commander.

INFORMATION > 5 > VOLUME + > POWER ON

3. The menu appears on the screen.
4. Move to the corresponding adjustment item using the ‘UP ’ or ‘ DOWN ’ arrow buttons on the Remote Commander.
5. Press the ‘ RIGHT’ arrow button to enter into the required menu item.
6. Adjust the data value using the ‘ UP’ or ‘ DOWN’ arrow buttons on on the Remote Commander.
7. To go back at any time press the ‘Return’ button on the Remote Commander.
8. Press the ‘Menu’ button on the Remote Commander to quit the Service Mode when all adjustments have been completed.
Note :
• To place the Remote Commander in ‘Service Mode’ press the following buttons together for two seconds.
INFORMATION > 5 > VOLUME +

To use the Remote Commander in ‘Service Mode’ press the rewind button on the Remote Commander twice. TT will then appear in the bottom right hand corner of the TV.
To take the Remote Commander out of ‘Service Mode’ press the same buttons above together again for two seconds or remove the batteries from the Remote Commander. After carrying out the service adjustments, to prevent the customer accessing the ‘Service Menu’ switch the TV set OFF and then ON again.
POWER SUPPLY CIRCUIT 
CLICK ON THE IMAGE TO ZOOM IN