TOSHIBA 26EL933G
SERVICE MODE AND SMPOWER SUPPLY CIRCUIT
SERVICE MODE
1. IR Key MENU > APPLICATIONS >
Sleep Timer > OK.
2. When display _ _ : _ 0 input 4 numbers 2766.
2. When display _ _ : _ 0 input 4 numbers 2766.
The Factory menu
will display.
3. Move to Tag "3" by Right/Left Arrow key on the Remote.
4. Select "Model Type" cell.
3. Move to Tag "3" by Right/Left Arrow key on the Remote.
4. Select "Model Type" cell.
5. Select the appropriate
model type by Right/Left Arrow key on the Remote. Model type is written on the
rating label.
6. Select
"Reset to Def".
7. Select "Yes" and press "OK" button on the Remote.
7. Select "Yes" and press "OK" button on the Remote.
Firmware Upgrade – USB
USB upgrade flow
1. Firmware upgrade.
Copy a Firmware BIN file to USB disk (root directory) with FAT 32.
For example the naming as below.
xx_xV_xL_DB_933x_022_REV00.bin, shall have difference version of firmware number show on red.
2. Plug USB disk into TV USB port.
3. IR key MENU→ SETUP→ Software Upgrade→ USB Upgrade.
During F/W upgrade will display percent on the screen when is finished will shown a message on LCD screen then unplug USB disk. TV will auto reset and power on again.
Note: Not allow copy more then 1 versions of firmware in USB disk.
1. Firmware upgrade.
Copy a Firmware BIN file to USB disk (root directory) with FAT 32.
For example the naming as below.
xx_xV_xL_DB_933x_022_REV00.bin, shall have difference version of firmware number show on red.
2. Plug USB disk into TV USB port.
3. IR key MENU→ SETUP→ Software Upgrade→ USB Upgrade.
During F/W upgrade will display percent on the screen when is finished will shown a message on LCD screen then unplug USB disk. TV will auto reset and power on again.
Note: Not allow copy more then 1 versions of firmware in USB disk.
POWER SUPPLY CIRCUIT
CLICK ON THE IMAGE TO ZOOM IN
