SONY KLV-26S550A - KLV-32S530A SERVICE MODE

SONY KLV-26S550A - KLV-32S530

LCD TV




SERVICE MODE 

Accessing Diagnostic Menu
1. While TV set on standby, press the following sequence on the Remote commander (RMGA016).
Onscreen display i+ > 5  > Volume - > Power
2. To quit the diagnostic menu, turn off and on the set.
Viewing the Service Mode Display
1. While TV on standby mode, press the following sequence on the Remote commander.
Onscreen display i+ > 5 > Volume + > Power
if wrong key is pressed or passed 3 seconds during each process, cancel entering the self-diagnosis display.)
 2. To reset, press 8 – 0 – ENTER .
3. To Exit, press the POWER key .

 Resetting the User Menu- Factory Reset
1. While TV on standby mode, press the following sequence
on the Remote commander
Onscreen display i+ > 5 > Volume + > Power
2. Select SERVICE with 2 or 5 On the Remote  Commander.
3. Select AUTO SET FACTORY with 1 or 4 On the Remote Commander.
4. Select data value with 3 or 6 On the Remote Commander to 0 to current condition
5. Press Power  to exit
White Balance Adjustment
Test Pattern:
a) Connect video signal of white to video input
b) Restort to original value : Color temp=0,
Picture=Max,Brightness=50,Backlight=max
1. While TV on standby mode, press the following sequence
on the Remote commander
Onscreen display i+ > 5 > Volume + > Power
2. Select SERVICE with 2 or 5 On the Remote  Commander.
3. Select AUTO SET FACTORY with 1 or 4 On the Remote Commander.
4. Select data value with 3 or 6 On the Remote Commander to 0 to current condition
5. Press Power  to exit
Board & Panel Replacement
When replacing the BT board and Panel readjust the W/B.

Preset "Test" button on remote commander
1. Press the following buttons simultaneously on the remote commander RM-GA016 for a few seconds.
Equipment list display > 5 > Volume +
2. Once completed, the RED button operates as a TEST button.
Entering Hotel Menu Mode
1. While TV set is on standby, press the following sequence on the remote commander(RM-GA016)
Onscreen display i+ > RED BUTTON  > Volume + > Power
2. When the TV turns on, the indication "Hotel Mode Settings in Progress" appears on the bottom center of the screen.
3. Press 'Menu' on the remote commander.
4. The menu appears.
5. Press UP/DOWN to select 'Hotel Mode Settings' and press ENTER
6. The  menu appears on the screen.
7. Press LEFT/RIGHT  to select 'Hotel Mode'. Then press ENTER
8. Now press LEFT/RIGHT  then UP/DOWN to select 'ON' and press  ENTER
9. The TV set resets and restarts.
10. Now press 'Menu' on the remote commander.
11. The following menu confirms the hotel mode is ON
Exiting Hotel Menu Mode
1. While TV set is ON, press the following sequence on the remote commander(RM-GA016).
Onscreen display i+ > MUTE  > Volume + > MENU
 2. The TV set restarts and show "Hotel Mode Settings in Progress" on the bottom center of the screen.
3. Now press 'Menu' on the remote commander.
4. The following menu confirms the hotel mode is OFF
Disable Hotel Menu Mode
1. While TV set is on standby, press the following sequence on the remote commander(RM-GA016).
Onscreen display i+ > RED BUTTON  > Volume - > Power
2. Press 'Menu' on the remote commander.
3. The below menu appears on the screen.
4. This menu confirms the hotel menu mode is disabled.