Thursday, February 27, 2014

HOW TO ENTER TO SERVICE MODE TO SALORA TV

        Salora Chasis 2B-F. Model 28N8S.

Quick press [--/-], [menu], [tv]

SALORA CHASIS: STEREO PLUS  MODEL:- 17/21SF, 25/28X71, 25/28SP50

Entering into service mode

Press [mute]->[ok](M)->[tv]
Service mode keys
To control:  use cursor buttons.
To store:  press [ok](M)
Cancellation of service mode
Press [tv]

SALORA M1  MODELS:- 6390, 7190 MV4000, PL14, 24101 852 SAT SOLI, 882 SAT SOLI, 885 SAT SOLI
Processor; CCU-SALO-07 (ccu20xx)

Entering into service mode

Press [c] () [o/v]() [m]
Cancellation of service mode
Press (!)

SALORA  CHASIS  STEREO PLUS
MODELS  5575SFN, 28T7
Processor  st92T93

Entering into service mode

Press [!] [M] [P]
Cancellation of service mode
Press [tv]

SALORA CHASIS EUROSTE REO-1
MODELS DIGIVISION63.2, 71.2, 2.N6
Processor  NES3-…NES2

Entering into service mode

Press [-/--] [menu] [tv] for 1 second

SALORA  PROCESSORS TVPO2065-D01, TVPO-2066-A25

Entering into service mode
Close contacts 15 and 23 SAA1250 in tv or close contacts 14 and 19 SAA1250 in tv or close contacts 11 and 21 SAA1250 in tv
Cancellation of service mode
Press [av]

SALORA MODEL 5301

 Entering into service mode

There are two ways for entering into service mode
1                                                        press following keys on the remote control
[display] [mute] [sleep] [fussy] [display]
2                                                        There are hidden keys inside the remote control handset.  You can press them to enter into the service mode.

Service mode adjustments

When you press first hidden key you will find following display on the screen

                             ================================
                             rf agc                                      32 or 21
                             pif vco                                     179
                             sub bright                               16
                             secam r-y                               8
                             secam b-y                              8
                             abl gain                                  3
                             abl point                                 1
                             rgb contrast                           54
                             ================================

When press second hidden key following display on the screen
                             ----------------------------------------------------------

                             sil
                             r dc                                          87
                             g dc                                         128
                             b dc                                         96
                             g drv                                        54
                             b drv                                        54
                             agc                                          21
                             sub bright                               16
                             -----------------------------------------------------------

When press third hidden key following display on the screen
                             HEAT RUN

Service mode keys

·        use [channel up] or [channel down] keys for selecting any parameter
·        use [volume up] or [volume down] keys for changing the value of any parameter.

SALORA  MODEL SC3630, SC3640, SC3642, SC2025, SC2051, SC2133, SC2141

Entering into service mode

Press following keys on the remote control
[2]->[mute->[display]->[mute]->[mute]   (mute two times)

display
                             --------------------------------------------------------------
                            
                             screen
                            
                             rb                                             92
                             gb                                            100
                             bb                                            80

                             rd                                             93
                             gd                                            14
                             bd                                            86
                             -------------------------------------------------------------
                             -------------------------------------------------------------
                             h.center                                  10
                             v.size                                      74
                             v. center                                 18
                             v.lin                                          16
                             user reset
                             -------------------------------------------------------------
                             -------------------------------------------------------------
                             auto agc                                 start
                             agc                                          24
                             agc point                                3.75
                             sub-bright                              64
                             sif-set                                     5.5
                             srs-chip                                  not used
                             -------------------------------------------------------------
You can also enter into service mode by pressing/shortin the three hidden keys given at the bottom row of the remote control.  To access these keys open the front cover of the remote handset.

                               

HOW TO ENETER SERVICE MODE TO MURATHA TV

                                               

MURATHA CHASIS T-255[SANYO]
MODEL: MARKET KIT
Entering into service mode

Press menu key on tv set and sleep key on remote handset simultaneously, again press sleep key on the remote handset.

Service mode keys

·           to change pages press cruser left/right keys
·           to select parameters within page press cursor up/down keys

service mode adjsutments

1          Enter into service mode
2          Select page 1
3          Adjsut R, G and B bias values to 127
4          Adjust r drive to 63, g drive to 8, b drive to 63.
5          Select page 5.
6          Set cross b/w parameter to 1.  remove all inputs to kill video interference.
7          Go to v-kill parameter and change value to 1.  ypu will get a h-line
8          Adjsut the screen voltage to get just visible horizontal line.
9          Now adjust through programme keys [1] &[4], [2] &[5], [3] & [6] bias for r,g,b respectively on the remote.  Adjust to get a white horizontal line.
10     Now open the raster by selecting cursor left/right key
11     Select cross b/w to 3 to get a white raster.
12     Again through programme keys on the remote do the drive adjustments
13     Use programme keys [1] & [4], [2] &[5], [3] &[6],  to adjust r/g/b drives.
14     Press mute to come out of the adjustments.
Similarly enter service mode for adjustments of vertical parameters and rf agc parametes  on page 2 and 5 respectievely.
Other parameters i.e sub brightness.colour/tint/sharpness/contrast are adjustable according to customer needs.
Speaker

For T-255 mono kit- 8ohms 3W
For T-255 stereo kit- 8ohms 6W
Spekers should be of the same specifications, as stated above, for better audio output.

Service mode menu

                         ***********************************
                         page 0
                         osd cont             90                    a
                         sub bright          63                    a
                         sub cont             50                    a
                         sub colour          60                    a
                         sub tint              32                    a
                         sub sharp           35                    a
                         *************************************

                         -------------------------------------------------------
                         page 1
                         red bias              127                  a
                         green bias          127                  a
                         blue bias            127                  a
                         red drive             63                    a
                         green drive         8                      a
                         blue drive           63                    a
                         C-TEMP  R         0                      A
                         C-TEMP  G         0                      A
                         C-TEMP  B         0                      A
                         -------------------------------------------------------
                         ==============================
                         PAGE 2
                         V POS 50HZ      40                    A
                         Vpos 60hz         40                    a
                         V size 50hz        90                    a
                         V size 60hz        82                    a
                         V sc                   12                    a
                         V lenearity         17                    a
                         V size cmp         7                     
                         ==============================

                         >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
                         page 3
                         h freq                 30
                         h phase 50hz     9                      a
                         h phase 60hz     7                      a
                         hblk-l                  4                      a
                         h blk r                 4                      a
                         blank def            0
                         coring enabl       1                      a
                         >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

                         <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
                         page 4
                         colour system    2
                         sif sys sw           5.5
                         c ext                   0
                         c by pass           0
                         c kill on              0
                         c kill off              0
                         <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<

                         *************************************
                         page 5
                         sync kill              0
                         rf agc delay        32
                         v-kill                   0
                         cross b/w           0
                         fm level              16
                         video level          5
                         *************************************

                         ==============================
                         page 6
                         digital osd          0
                         audio switch       0
                         akb def              1
                         auto flesh          0
                         count down mode 0
                         grey mode          0
                         v sync set up      0
                         ==============================
                        
                         >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
                         page 7
                         filter sys             2
                         vol filter              0
                         vif sys sw           38.9
                         brt abl def          0
                         brt abl threshold                        4
                         brt mid stop def 0
                         emg abl def        0
                         opt filt sys          1
                         >>>>>>>>>>>>>>>>>>>>>>>>>>>>>

                         ------------------------------------------------------
                         page 8
                         afc gain and gate                      0
                         secam b-y dc     13
                         secam r-y dc      13
                         r-y/b-y gain bal   12
                         r-y/b-y angle       12
                         b gama select    0
                         rg gama select   0
                         -----------------------------------------------------

                         =============================
                         page 9
                         audio mute         0
                         fm mute             0
                         video mute         0
                         sound trap         4
                         fm gain               0
                         de-emp tc          1
                         fbp-blk sw          0
                         ============================

                         **********************************
                         page 10
                         t disable             1
                         vertical test        0
                         tint test              0
                         colour test         0
                         drive test            0
                         contrast test      0
                         osd contrast test                       0
                         akb test             0
                         **********************************

                         ______________________________
                         page 11
                         osd h pos           36
                         opt col sys         2
                         opt av sys          0
                         tune lock            clr
                         select tuner (wittis) (TCL) 5v/9v
                         lna                      no
                         aqudio menu      no
                         for stereo kit      yes
                         logo naming       set
                         semi trans b/g    1

                         _______________________________